Product overview
RS 5200 | 9
Overview of the acoustic signals/beeps
The LEDs on the stethoset receiver and on the transmitter indi-
cate the current operating state. If you are not pressing any
button on the stethoset receiver, the LEDs automatically dim
after approx. 30 seconds to not disturb you.
Beeps Meaning
during operation,
2 beeps
The rechargeable battery is almost
empty, recharge the rechargeable
battery (see page 15).
during operation, no audio
transmission, 5 beeps
The receiver is outside the
transmission range (see page 39).
when changing the volume The maximum or minimum volume
is reached (see page 22).
when changing the balance
setting
The maximum or minimum balance
setting is reached (see page 22).
To Next Page
Loading...
