Quick guide
12 | Sennheiser TVS 200 Earbuds
6. Connecting the earbuds to the “TV Clear
Transmitter 2”
If you purchased the devices as a set, the earbuds and the transmit-
ter are factory paired with each other.
▷ If you purchased the devices separately, you have to manually
start the pairing process once (>
15).
After the first manual pairing, the earbuds automatically connect
to the transmitter when they are taken out of the charging case.
Refer to the “TV Clear Transmitter 2” instruction manual to con-
nect and operate the transmitter.
www.sennheiser-hearing.com/tvcleartransmitter2
LED
4.
3.
Hold 2s
3 blue LEDs
1. 2.
Short press
1x
To Next Page
Loading...
