Need help?Do you have a question about the Sensor ALARM KEYPAD and is the answer not in the manual?
Verifies controller firmware date, essential for proper system operation and potential upgrades.
Details the procedure for installing the Redundant Communications Bus (RCB) kit components.
Explains the wiring configuration for connecting the Alarm Keypad to the controller.
Guides through initial editing of the GuardPoint Pro .ini file for system configuration.
Covers defining input groups, event handling programs, and cardholder permissions in GuardPoint Pro.
Describes the procedure for arming Alarm Zones using the Alarm Keypad and PIN.
Explains the two methods for disarming Alarm Zones via card or keypad.
Details how to query the current status (armed/disarmed) of a specific Alarm Zone.
Explains how to link an Alarm Zone to a reader for access control during armed states.
Discusses the creation and control of multiple Alarm Zones, including system architecture.
Describes how Alarm Zones can share inputs on controllers and how this affects arming/disarming.
General| Power Source | Battery |
|---|---|
| Connectivity | Wireless |
| Keypad Type | Membrane |
| Number of Keys | 12 |
| Backlight | Yes |
| Current Consumption | Active: <15mA |
| Operating Temperature | 50°C |
| Humidity | non-condensing |
| Weight | 150g |
| Compatibility | Sensor Alarm Systems |
To Next Page