SensoScientific B20-200-OTA

Need help?

Do you have a question about the SensoScientific B20-200-OTA and is the answer not in the manual?

Summary

OTA Series

Getting to Know Your Device

SensoScientific Cloud

Setting Up Your Device: App

Step 1 - Download App

Instructions on how to download the SensoScientific application from app stores.

Step 2 - Set Device to Provisioning Mode

Procedure to activate the device's provisioning mode.

Step 3 - Connect to Wi-Fi

Guides the user to connect their phone to the OTA Node's Wi-Fi network.

Step 4 - Configure Wi-Fi

Steps to configure the device's Wi-Fi connection via the app.

Setting Up Your Device: Browser

Step 1 - Set Device to Provisioning Mode

How to put the device into provisioning mode for browser setup.

Step 2 - Connect to Wi-Fi

Connecting the Wi-Fi enabled device to the specific network.

Step 3 - Configure the Node

Configuring network settings via the device's web interface.

Step 4 - Verify Profile

Verifying the network profile configuration on the device.

Display Notifications

LED Status

Push-Button Functions

Wake Up:

How to wake the device and reset the screen using the center button.

Silence Speaker:

Procedure to temporarily silence the device's audible alarm.

Min;Max Reset:

Steps to reset the minimum and maximum recorded readings.

Turn Off Device:

Instructions on how to properly turn off the device.

Delete Wi-Fi SSID and Password:

Steps to clear stored Wi-Fi network information from the device.

Contact

Document Information