Senstar LM100 Product Guide Page 7
1 System planning
System description
The Senstar LM100 intelligent perimeter lighting and sensing solution combines high-intensity
LED lighting with an accelerometer-based vibration detection sensor. The system is comprised of
a distributed set of LM100 luminaires, which include the LED lights and the vibration detecting
sensor, a gateway device that processes the signals from the luminaires, and a luminaire AP
(access point) that provides an RS-485 half-duplex connection between the RF-based luminaires
and the gateway.
The Senstar LM100 luminaires are typically mounted on the perimeter fence, but can also be
mounted on walls or other surfaces. The luminaires communicate over a proprietary wireless
mesh network transmitting status information and receiving control point commands from the
gateway via the hard-wired connection to the luminaire AP. The gateway provides the user
interface to the distributed luminaires as well as the interface between the luminaires and a
security management system (SMS). The Senstar LM100 gateway supports up to 100 luminaires
including the luminaire AP.
Figure 1: luminaires at night
To Next Page