Sentec IPV-1C - Controls and Starting Settings; Master Switch Operation; Operational Pressure Adjustment; Percussion Setting

Controls + Starting Seings
Master Switch turns the IPV®-1C
controller ON and OFF.
Starting Position: OFF
Operational Pressure controls the peak
operating pressure of the entire unit.
Starting Position: Rotate fully to the left
in the OFF position.
NOTE: for patients coming o
respiratory support consider starting
with Operational Pressure on (i.e. knob
turned slightly to the right) and quickly
titrate to target the MAP delivered from
previous support.
Percussion determines the rate of high-
frequency percussive pulses delivered to
the patient
Starting Position: Rotated fully to the left.