Sentec IPV-1C - User Manual

Place a maximum of 20 ml of normal
saline or prescribed medication in the
nebulizer cup.
Connect yellow tubing quick-connect
ing to nebulizer cup.
Connect clear tubing quick-connect
ing to the cap.
Press red tubing onto connector.
Connect blue corrugated tubing to
exhalation port.
Connect the tubing to the
corresponding-colored connectors.
Do not obstruct green remote port
Ensure Master Switch is OFF.
Then, connect the IPV® to a 50 psi
gas source.
Assembling Phasitron
Patient Connections
IPV
®
-1C Quick Reference Guide
Mouthpiece
Instruct patient to keep
lips and cheeks splinted
to ensure the pulses are
directed into the lungs.
Mask
It is recommended
to use a resuscitation
mask or similar non-
vented mask.
Direct
The Phasitron can be
aached directly to
an articial airway or
airway adaptor.
Before you start
NOTE: The IPV®-1C is not
recommended for use in
neonates. For patients under ve
years of age without an articial
airway, mask conguration is
recommended

Summary

Assembling the Phasitron

Nebulizer Cup and Tubing Connections

Steps for adding medication and connecting yellow, clear, and red tubing to the nebulizer cup and cap.

Exhalation and Gas Source Connections

Connects blue corrugated tubing to the exhalation port and the device to a 50 psi gas source.

Patient Connection Methods

Mouthpiece and Mask Usage

Instructions for patient positioning with a mouthpiece or mask for effective therapy delivery.

Direct Airway Connection

Attaching the Phasitron to an artificial airway; notes on use in neonates and young children.

Controls and Starting Settings

Master Switch Operation

Turns the IPV®-1C controller ON and OFF. Starting position is OFF.

Operational Pressure Adjustment

Controls peak operating pressure. Starting position is fully left.

Percussion Setting

Determines the rate of high-frequency percussive pulses. Starting position is fully left.

Delivering IPV Therapy

Therapy Workflow Steps

Sequence of actions from patient positioning to connecting the device and adjusting settings.

Patient Settings Guidance

Adjusting operational pressure and percussion based on patient response and lung condition.

Digital Display and Troubleshooting

Digital Display Parameters

Explanation of Mean Airway Pressure, Pulse Frequency Rate, Usage Timer, and Pulsating Bar Graph.

Troubleshooting Common Issues

Guidance for resolving digital display off, nebulizer not aerosolizing, or slow/no percussions.

Sentec IPV-1C Specifications

General

Brand	Sentec
Model	IPV-1C
Category	Medical Equipment
Language	English