Sentec SDM - Sensor Application: MAR;e-MI or MAR;e-SF; Applying the Sensor with MAR;e-MI;SF

Sentec AG, Ringstrasse 39, CH-4106 Therwil, Switzerland, www.sentec.com
HB-010103-e Date of release: 01/2022
5
1. Configuring the SDM
The menu access of the monitor must be disabled in V-STATS™ to avoid patients changing monitor
settings accidently or on purpose.
Either select the preconfigured SDM Home Profile of V-STATS™ or follow the below steps:
1
Switch off auditory alarm signals permanently using V-STATS™.
2
Set the patient´s individual measurement parameters.
3
Then, select ‘System Settings/Display in Sleep Mode’.
4
Disable patient menu access by unticking the Menu Access box within the V-STATS™ system settings
For further information, refer to the V-STATS™ Instruction Manual
HB-006042.