To Next PageTo Next Page
Need help?Do you have a question about the SenTech STC-400 Series and is the answer not in the manual?
Warns against opening the unit and to refer servicing to qualified personnel.
Advises against exposing the appliance to rain or moisture.
Details compliance statements for US (FCC) and Canadian regulations.
Explains the alert symbols for dangerous voltage and important instructions.
Advice on camera handling, avoiding damage, and proper storage.
Guidelines on avoiding moisture, extreme temperatures, and magnetic fields.
Instructions for cleaning and using the correct power supply.
Lists the camera and application manual included in the box.
Details optional parts like power connectors and tripod adapters.
Mentions CCD resolution and picture quality details.
Provides dimensions and weight for different models.
Highlights high shutter speeds for capturing fast-moving objects.
Describes selectable gamma and gain adjustment options.
Explains field or frame accumulation mode selection.
Details for STC-400, STC-410, STC-400HOL, STC-410HOL models.
Details for STC-SS400, STC-BS400, STC-LS400, STC-RS400 models.
Details for STC-SS400, STC-BS400, STC-LS400, STC-RS400 camera heads.
Important note about disconnecting power before removing the camera cover.
Connector for power, external sync signals, and video output.
Adjustment for video amplifier gain when in 'Manual' mode.
Switch to select between Manual and Fixed gain modes.
BNC connector for the camera's composite monochrome signal.
Switch for selecting HD/VD signal impedance (75 Ohm or High Impedance).
Switch for selecting Internal or External sync modes.
DIP switch settings for shutter speed in frame integration mode.
DIP switch settings for shutter speed in field integration mode.
Diagram and explanation of horizontal pixel layout and timing.
Diagram of vertical pixel configuration for frame accumulation.
Diagram of vertical pixel configuration for field accumulation.
Device to reduce vertical smear caused by strong light sources.
Mating connectors and pre-wired cables available as optional parts.
Adapter for easy camera installation to standard tripods.
General| Brand | SenTech |
|---|---|
| Model | STC-400 Series |
| Category | Security Camera |
| Language | English |
