Sentera STL Series - Transport and Storage; Warranty and Restrictions; Maintenance

www.sentera.eu
MIW-STL-EN-002 - 30 / 07 / 2018 8 - 8
back to the table of contents
TRANSPORT AND STORAGE
Avoid shocks and extreme conditions; stock in original packing.
WARRANTY AND RESTRICTIONS
Two years from the delivery date against defects in manufacturing. Any modifications
or alterations to the product after the date of publication relieve the manufacturer
of any responsibilities. e manufacturer bears no responsibility for any misprints or
mistakes in this data.
MAINTENANCE
In normal conditions this product is maintenance-free. If soiled, clean with a dry or
damp cloth. In case of heavy pollution, clean with a non-aggressive product. In these
circumstances the unit should be disconnected from the supply. Pay attention that
no fluids enter the unit. Only reconnect it to the supply when it is completelydry.
ATTENTION
Use only fuses with type and rating specified above; otherwise, loss of warranty
will ensue.
STL
ELECTRONIC FAN SPEED
CONTROLLER, 230 VAC