EasyManuals Logo

Sentinel FX100B User Manual

Sentinel FX100B
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
Technical Specifications
Model............................................................................................... FX100B
Cutting Style ................................................................................... Crosscut
Shred Size ..............................................................0.2” x 1.60” (5.2 x 41mm)
Sheet Capacity .............................................................................. 10 sheets
Shred Speed Max Sheet Capacity ................................ 6.0 ft/min (1.8 m/min)
Intake Throat Width ................................................................ 8.7” (220mm)
Dimensions (l x w x h) ..................... 13.1” x 6.7” x 14.6” (335 x 172 x 371mm)
Weight ...................................................................................9.7 lbs (4.4 kg)
Basket Capacity ......................................................... 3.0 gallons (11.5 liters)
Run Time (min) ...................................................... 2 mins. ON / 30 mins. OFF
Noise Level (motor)..............................................................................72 dB
Product / Cutter Warranty ................................................... 1 Year / 1 Year
How To Use Your Shredder
Setup Instructions:
1. Mount the shredder correctly to the basket.
2. Connect the power cord to any standard 120 volt AC outlet. For pluggable
equipment, the socket-outlet shall be installed near the equipment and shall be
easily accessible.
3. Slide the switch to ON position.
4. Insert paper to activate.
Setup Cautions:
1. All shredders have very sharp, exposed blades on the underside. Please use care
when mounting the shredder on to the wastebasket.
2. Make sure power cord is not damaged in any way and that the outlet is properly
functioning.
3. Never attempt to shred sealed envelopes. Doing so may damage the shredder.
Always remove and unfold envelope contents completely before attempting
to shred. NEVER shred envelopes, labels or anything with glue or any sticky
substance as this will lead to paper jams.
4. It is normal for residual lubricant in the motor to burn off during the rst several
extended uses of your shredder. Should you notice a slight burning odor or the
presence of small wisps of smoke during the rst several extended uses, you may
continue using the shredder. If either symptom continues to occur after repeated
use, please contact technical support for assistance.
10-SHEET
CROSSCUT
PAPER SHREDDER

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sentinel FX100B and is the answer not in the manual?

Sentinel FX100B Specifications

General IconGeneral
BrandSentinel
ModelFX100B
CategoryPaper Shredder
LanguageEnglish

Related product manuals