Why is the motor temperature raised while the output speed is reduced in my Sentinel Mixer?
Several factors can cause the motor temperature to rise while the output speed decreases. It could be due to voltage being too low, overloading the mixer, or using a mixing speed that's too high (or the wrong attachment). Check the power supply, reduce the load, and select a more suitable speed and attachment to resolve the issue.
What to do if my Sentinel SHLM-20B Mixer has oil leakage?
If your mixer is leaking oil, the seal rings are likely worn out. You should replace them.
What to do if attachments hit the bowl of my Sentinel SHLM-20B?
If the attachments are hitting the bowl, either the attachment or the bowl itself may be damaged. Repair or replace the affected component.
Why is there noise or high temperature coming from the gearbox of my Sentinel SHLM-20B?
Noise or high temperature from the gearbox usually indicates insufficient lubrication. Try adding or replacing the grease.
How to fix a Sentinel SHLM-20B Mixer when the tool shaft does not rotate after starting the machine?
If the tool shaft isn't rotating after starting the mixer, the electric wiring may be loose. Check the electric wiring, plug, and cord.
Steps for attaching and operating the grinder attachment, including safety warnings.
Instructions for cleaning and maintaining the grinder attachment, including blade care.
Steps for attaching and operating the grinder attachment, including safety warnings.
Instructions for cleaning and maintaining the grinder attachment, including blade care.
To Next Page
General