Sentricon Detector Device User Manual

The Detector device was designed to locate and identify stations
for the Sentricon
®
System with Always Active
™
technology LID top
caps or ESP
®
technology Transensors When using Sentricon with
ESP technology, the Detector will also determine the station status.
Detector Features
– LCD display — identies station, and indicates station status (with ESP technology
only)
– Proximity sensor — easier to locate stations
– Replaceable, rechargeable Nickel Metal Hydride batteries—commercially available
and easy to replace
– Auto shut off — saves battery life
– Adjustable pole length with ergonomic design — enhanced technician comfort
– No exposed wires — easier to use around landscaping and reduced risk for damage
and repairs
– Light weight — enhanced technician comfort
When You Get the Detector
1. Remove top panel electronics box and insert 8 nickle metal hydride batteries.
2. Use the included charger found in the box to fully charge the batteries.
3. Review instructions for each feature of the auxilary options.
4. Watch the “How-to-Use” video on the “product resources” section of the CSS Resource Center (www.cssresourcecenter.com).
5. Test the device in the ofce to make sure it works properly before going to a job site.
On & Off
To turn the device on, lightly tap the green power button (see photo). To turn the device off, tap the green power button a second time. The
device will automatically turn off after 2 ½ minutes of inactivity. (This time can be adjusted.)
Audible Notications
– Device power on and device power off — brief audible tone
– Station proximity — audible tone increases in frequency as the device gets closer to the station
– Maintenance alert — pulsating audible tone (with ESP technology only)
Light Colors
– Green light — power is on
– Red light — station proximity
– Orange light — batteries are charging
– Yellow light — batteries are no longer capable of accepting a charge; replace the batteries
Pole Adjustments
The length of the pole can be adjusted by loosening the adjustment knob and shortening or lengthening the telescopic pole.
Protective Case
Will be included with the unit to help absorb impact from normal use and prevent scufng.
DETECTOR DEVICE INFORMATION AND USE DIRECTIONS

Sentricon Detector Device Specifications

General

Brand	Sentricon
Model	Detector Device
Category	Security Sensors
Language	English

Summary

Detector Device Information and Use Directions

Detector Features Overview

Lists key features like LCD display, proximity sensor, rechargeable batteries, auto shut-off, and adjustable pole.

Initial Detector Setup

Steps for initial setup: battery installation, charging, and testing the device before field use.

Device Power Control

Instructions for turning the device on and off, including its automatic shut-off feature.

Audible Notifications Explained

Details the audible tones for power status, station proximity, and maintenance alerts.

Indicator Light Meanings

Explains the color coding of indicator lights for power, proximity, charging, and battery status.

Pole Adjustment Guide

How to adjust the telescopic pole length for user comfort and ergonomics.

Protective Case Information

Mentions the included protective case for impact absorption and preventing scuffs.

Battery Specifications and Charging

Details battery life, charging indicator, and replacement of AA rechargeable batteries.

Moisture and Durability

Clarifies the detector is water-resistant, not waterproof, advising caution in wet conditions.

Bluetooth Connectivity

States the unit supports Bluetooth 2.0 + EDR for use with mobile platforms.

Repair and Maintenance Contact

Provides a contact number for any repairs or maintenance issues.

FCC Compliance and Safety

Information on FCC compliance, radiation exposure limits, and safe operating distances.

Detector Device Features Definitions

Battery Housing Installation

Instructions for installing batteries by removing the battery door and inserting batteries correctly.

Power Button Operation

Detailed explanation of the power button function, including lights and display messages.

Charge and Replace Light Indicators

Explains the behavior of Charge and Replace lights during charging and battery status.

Programmable AUX Features

Details how to adjust volume, turn off the backlight, and configure auto shut-off time.

Send and Erase Tag Data

Functions for sending stored data via Bluetooth and erasing memory data.

Bluetooth Pairing Setup

Instructions for setting up pairing with external storage devices via Bluetooth.

Unique Mode Functionality

Describes the mode where the detector shuts off after inactivity or a detected tag.

Detector Device Features Diagram

Diagram of Detector Components

Visual labeling of key components: LCD Display, Power Button, Light Indicators, AUX, Battery Housing, Speaker.