13
Power supply for toilet
If the toilet is to be mounted against a wall, a power cord must be connected to the toiletbefore it is moun-
ted. Afterwall mounting, the connection is not accessible.
The toiletmust be connected to a power source. The toiletcomes with a power adapter for 110–240 V and
a 12 V battery cable. Regardless of the power source, the chord must be connected to the back of the toilet,
at the marked input in the picture above. Make sure that the plug is properly connected.
Verify that the toilet is receiving power
by checking that air is exiting the venti-
lation outlet.
To Next Page
Loading...
