23
22
DEUTSCHESPAÑOL ITALIANO ENGLISHFRANCIS
To replace a component not
commonly used, only use orig-
inal SEPPI M. spare parts.
Using non-original parts could
damage and endanger proper
operation of the machine.
Therefore the warranty loses
its validity and the manufac-
turer will not be held liable
thereof.
7. SPARE PARTS
The spare parts can be consulted in the attached
Spare Parts List.
Do not release parts or
fluids of the machine into the
environment and dispose of
them by means of specialised
companies.
9. DISMANTLING, SCRAPPING AND
WASTE DISPOSAL
It is necessary to separate the different types of
materials in order to send them to specific sepa-
rate waste collection facilities.
As far as metals are concerned, recycling requires
dividing them into steel and other metals or
alloys.
Pay particular attention to electrical products,
plastic or rubber materials, which must be dis-
posed of separately in compliance with standards
in force.
8. CONTROL REGISTER
To testify the correctness of all the inspections
and maintenance performed on the machine, as
described in this publication, it is recommended
to fill in a control register and to keep it updated
during the whole life of the machine, entering
dates, objects undergoing inspections/mainte-
nance and overall hours of use. The maintenance
technician appointed by the customer is in charge
of filling in this register in all its parts
The register complies with that required by the
laws of most Countries, and must contain:
- inspection (even visual) interventions and
routine maintenance, included in the "Main
-
tenance" chapter or which are necessary to
maintain the machine in good conditions and
efficiency for its safety, regardless of who
performs them;
- extraordinary inspections and maintenance (in
-
cluding repairs and changes carried out by the
manufacturer), in order to keep the machine in
good conditions whenever exceptional events
occur;
- all activities regarding the life and use of the
machine.
To Previous Page
Loading...