Do you have a question about the Sepura STP9000 and is the answer not in the manual?
IP Rating | IP67 |
---|---|
Channel Spacing | 25 kHz |
Frequency Bands | 806-870 MHz |
RF Power Output | 1W |
Battery Capacity | 1880 mAh |
Battery Life | Up to 16 hours |
TETRA Air Interface | ETSI EN 300 392-2 |
Security | Air Interface Encryption, End-to-End Encryption |
Operating Temperature | -20°C to +60°C |
Compliance with specific standards for protection against electromagnetic fields, including NRPB and ICNIRP guidelines.
Adherence to ETSI specifications for electromagnetic compatibility (EMC) requirements.
Self-certification against R&TTE Directive and CE marking for product compliance.
Adherence to MIL STD 810E standards and ETSI EN 300 019 for environmental factors.
Design for hazardous environments, including gas and dust, per IECEx and ATEX specifications.
Regulatory statements applicable to users in North American and Canadian markets, covering FCC and IC compliance.
FCC compliance statements for SRG3900 radios, including user modifications and interference rules.
FCC compliance for STP80xx/STP81xx/STP82XX radios, addressing modifications and interference.
Specifies the operating temperature range (-20°C to 60°C) and humidity (98%) for Sepura radios.
Lists IP, IEC, and ATEX certifications for various Sepura radio models.
Front and rear views and key component details for STP9000, STP8000, STP9100, STP8100, STP9200, STP8200, and STP8X radios.
Information on SIM/SD card handling, facility connectors, rugged accessory connectors, and belt clips for STP series.
Fitting, removal, charging, safety, and low battery warnings for STP series batteries.
Front and rear views, battery, and connector details for SRH3500, SRH3800, and SRH3900 radios.
Instructions for charging SRH series batteries using approved chargers and safety precautions.
Details of the SRG3000 Mobile/Gateway Transceiver unit, including connectors and required components.
Illustrations and key components of Standard and Colour Consoles for the SRG3000 series.
Description of the Applications Interface Unit and connection of audio accessories to mobile/gateway radios.
Explanation of controlling audio accessories, call modes, and audio presentation for duplex/half-duplex calls.
Guidelines for safe usage of STP8X radios, cleaning, and avoiding extreme temperatures.
Precautions for handling, replacing, and disposing of batteries, especially for STP8X ATEX/IECEx models.
Recommendations for using approved accessories and understanding accessory detection warnings.
Details on Transmit Inhibit mode and safety guidelines for fitting and using antennas, especially for STP8X.
Information on water ingress in heavy rain for certain models and reference to regulatory compliance.