Serafim R1 - Set Pedals to Work as y Axis

20
6. Set Pedals to Work as Y Axis: (For
controlling flight altitude for aircrafts)
(1) Hold SHARE and OPTIONS buttons for 3
seconds, and the green LED would be
lit.
(2) Press LEFT arrow key. It means that
setting is done when the green LED
become dimmed.
7. Set Paddle Shifters to Work as Y Axis: (For
controlling flight altitude for aircrafts)
(1) Hold SHARE and OPTIONS buttons for 3
seconds, and the green LED would be
lit.
(2) Press RIGHT arrow key. It means that
setting is done when the green LED
become dimmed.