24
3. Procedures for Customizing Buttons:
(1) Hold BACK and START buttons for 3
seconds, and the green LED would be
lit.
(2) Firstly, press one of “Buttons for
Replacement”; then the green LED
starts blinking.
(3) Press one of “Customizable Buttons”. It
means that setting is done when the
green LED become dimmed.
4. Clear All Customized Buttons:
(1) Hold BACK and START buttons for 3
seconds, and the green LED would be
lit.
(2) Hold START button for 4 seconds. It
means that all customized buttons are
restored when the green LED become
dimmed.
To Next Page
Loading...
