SereneLife SLPUMP50 - Fault Handling; Troubleshooting Common Issues; Maintenance and Storage; Care and Storage Guidelines

www.SereneLifeHome.com
10
X. FAULT HANDLING
IX. MAINTENANCE AND STORAGE
•
After using, or if you want to move, maintain or adjust the
product, please rst pull out the DC plug from the socket.
• When idle, it shall be properly stored after being fully cooled.
• It shall not be exposed to the rain or immersed in water.
• Please store it in the dry and ventilated place.
XII. SUGGESTIONS
The warranty period of this product is one year, and it is
suggested to use the original accessories. For any fault not
caused by using the original accessories, it shall be out of the
warranty scope.
www.SereneLifeHome.com
11
Fault Inspection Solution
The air pump
won't start
normally
1. The power source is
not plugged properly.
2. Low battery charge
3. Overheating or over-
load causes motor stop.
1. Make sure that the power wire
is plugged in the 12V DC socket.
2. Charging.
3. Cool the motor and restart it.
4. If the problem cannot be
solved, please contact local
service agents or similar
authorized personnel to
change the product.
Slow or
abnormal
ination or
deation.
1. Check whether the
hose is blocked or
cracked.
2. The joint between the
hose and air pump or
air bag is not installed
properly.
1. Change the hose or make it
unblocked, and check whether
the hose is cracked.
2. Reinstall the hose.
3. If the problem cannot be solved,
please contact local service
agents or similar authorized
personnel to change the
product.