BlueSnap Commands Version 4.81SIO, 1/20/2016 Page 20 of
27
Cedar Park, TX, USA • (512) 994-3630 • sales@serialio.com www.serialio.com
8 Example of a Master Discovery/Connection Sequence
From power up and no connection:
1) Perform an Inquiry to obtain BT_Address (unless it is already known).
Sent : $$$ // Places Radio in Command Mode
Reply:CMD<cr>
Sent : I,30<cr> // Looks forBluetooth devices
Reply:00A096112233,1F00<cr>Inquiry Done<cr
2) Store the remote address just found.
Sent : SR,00A096112233 <cr> (or just SR,I if this was the only device found ).
Reply:AOK<cr>
3) Connect.
Sent : C <cr> // Places Radio in Connect
Reply:AOK<cr>
Device will attempt connection to remote slave. “TRYING” will be displayed.
Reply:<text>CONNECT<cr> // this will be displayed once connection is made, if <text>
string is defined in the stored parameters.
4) Send /Receive data.
To Next Page
Loading...