STEP 30 STEP 31
SHOCK ASSEMBLY
22
31.1 31.2 32.1
32.2
31.3
For the correct piston holes please
check the default setupsheet.
Completely tighten the nut, once the
pistonshaft is inserted (step 31.1).
R2
R2
M3X3
Use some silicone oil
during the assembly.
M3x3
R2
Use some silicone oil
during the assembly.
Use some silicone oil
during the assembly.
Oil the foam fully before
Completely tighten the nut assembled
in step 30.2.
Make sure the stescrew sits in
the not on the pistonshaft.
To Next Page
Loading...
