Need help?Do you have a question about the Serpent COBRA SRX8e PRO and is the answer not in the manual?
General| Scale | 1/8 |
|---|---|
| Drive | 4WD |
| Suspension | Independent |
| Width | 310mm |
| Tire Type | Not included |
| Motor | Not included |
| ESC | Not included |
| Battery | Not included |
| Gearbox | Single speed |
| Chassis | 7075 T6 aluminum |
| Motor Type | Electric Brushless |
| Shock Absorbers | Big Bore 16mm |
| Class | Buggy |
Crucial safety guidelines and precautions before assembly and operation.
Steps 1 and 2 for assembling the center differential components.
Steps 3 and 4 for filling and sealing the center differential.
Steps 5 and 6 for assembling front/rear differential components.
Steps 7 and 8 for filling front/rear differentials with oil.
Steps 9 and 10 cover initial rear chassis assembly.
Steps 11 and 12 continue rear chassis assembly.
Steps 13 and 14 focus on rear suspension components.
Steps 15 and 16 involve rear anti-roll bar and mudguards.
Step 17 focuses on rear driveshaft and upright assembly.
Step 18 covers rear camberlink adjustments.
To Next Page
