Need help?Do you have a question about the Serpent SRX2 GEN3 CARPET and is the answer not in the manual?
Crucial safety guidelines and operating instructions for the RC car.
Overview of the SRX2 Gen3 and manual structure.
Explanation of line symbols used in the assembly instructions.
Explanation of icon symbols used in the assembly instructions.
Instructions for assembling the steering block components.
Adjusting camber links and ballstud lengths for performance.
Setting trackrod length and mounting front shocks.
Adjusting the initial setting of the slipper clutch.
Assembling differential parts and installing pins.
Using inserts to adjust rear suspension geometry (toe-in, anti-squat).
Mounting the differential housing and using differential inserts.
Adjusting rear axle height and offset for traction.
Setting the driveshaft position using the wheel-axle pin.
Using shims to adjust rear suspension and wheelbase.
Detailed explanation of suspension insert options and their effects.
Adjusting rear camber link length and setting inner/outer positions.
Assembling shock components and setting eyelet lengths.
Filling shocks with oil and measuring their extended length.
Using different spring cups for shock tuning.
Mounting front and rear shocks in their default positions.
Installing the motor and noting the pinion is not included.
Guidance on using long or short battery posts for different battery types.
Mounting the ESC and Receiver (RX) using double-sided tape.
Securing the battery using foam pads.
Using set screws to reduce chassis twist.
Chart showing different wing angles using spacers.
Cutting, painting, and applying decals to the car body.
Instructions for gluing rubber tyres to the wheels.
Links to spare and optional parts for the SRX2 Gen3.
Information on Serpent tools and merchandise.
Links to Serpent's official websites, blogs, and promo pages.
Serpent's social media channels for updates and support.
To Next Page
General