STEP 1
STEP 2
Always use two people when setting up, moving or ipping
base.
Place bed base box in a desired location with bottom of box facing
up.
Remove binding straps and packing materials, making sure not to
puncture box with any sharp objects.
Headboard brackets are optional and can be purchased from
Ergomotion separately. If installing a headboard, please see
headboard bracket installation instructions or Owner’s Manual.
See Owner’s Manual for complete operating instructions.
PART LIST
Before discarding packing materials, ensure all parts are accounted for.
Some parts may be attached to base or inside boxes. Please inspect carefully.
Additional Parts included with Divided King:
QUICK SETUP GUIDE
Wireless
Remote
(3) AAA
Batteries
Mattress
Retainer Bar
(4) Legs &
Washers
Manual
Warranty Card
Quick Setup Guide
(6) Legs & Washers
Divided King
Installation Guide
Power Cord
Power
Supply
Power
Down Box
Misc. Parts
(not included):
• Headboard Brackets
• Surge Protector
• (2) 9V Batteries
Only included in Twin Long and Cal King
Split Bases. Not included in Divided King.
Connecting
Strap
SmartSync
®
Cord
(2) C-Clamps (4) Long Bolts
(4) Short Bolts
(8) Washers
(8) Nuts
5 mm Hex Wrench
13 mm Wrench
Legs adjust from 5-8 in. Simply
twist the bottom portion of the
leg to extend and retract to your
preferred height.
To Next Page
Loading...
