Owner’s Manual
Revolution LGR Dehumidifier
#613 - 115V
MANUFACTURED BY DRI-EAZ PRODUCTS, INC. FOR SERVPRO INDUSTRIES, INC.
15180 Josh Wilson Road, Burlington, WA 98233
Phone: 800-932-3030 Fax: 360-757-7950 http://Revo.DriEaz.com
The Dri-Eaz
®
Revolution LGR Dehumidifier reduces humidity in enclosed environments by removing wa-
ter vapor from the air. The Revolution is ideal for water damage restoration, structural drying, construc-
tion, and many other applications requiring temporary, high-performance dehumidification.
Patents: http://www.LBpatents.com
R EAD AND SAVE THESE INSTRUCTIONS
Read and understand manual before operating.
WARNING! Do not alter or modify your Revolution in
any way. Use only replacement parts authorized by
Dri-Eaz Products, Inc. Modifications or use of unap-
proved parts could create a hazard and will void
your warranty. Contact your authorized Dri-Eaz dis-
tributor for assistance.
WARNING! Electric shock hazard, rotating fan, hot
surface hazards. Unplug unit before opening cover
for cleaning or servicing.
WARNING! Unit must be grounded.
• Keep motor and wiring dry. Keep out of standing wa-
ter and do not install in area likely to be subject to
water intrusion. Do not expose to rain, water or
snow.
• Insert three-prong plug on power cord into a match-
ing electrically grounded outlet. Do not use adapter.
Never cut off third prong.
• Do not use an extension cord.
• To reduce the risk of fire or electric shock, do not
use this unit with any solid-state speed control de-
vice.
FIRE HAZARD
• Keep away from open flames and heat sources.
• Do not use or store where vapors from gasoline, sol-
vents, thinners or other flammable materials may be
present.
WARNING! Unplug unit before cleaning or servicing.
• Turn off unit and unplug before lifting or moving.
• Handle the unit carefully. Always operate the unit on
a stable, level surface. Do not drop, throw, or place
where it could fall. Rough treatment can damage the
unit, and may create a hazardous condition or void
the warranty.
• Inspect the power cord before use. If cord is dam-
aged, do not use. Always grasp the plug (not the
cord) to unplug.
• The unit must be operated on a 115V/60 Hz circuit
protected by a Ground Fault Circuit Interrupter
(GFCI) device.
• Do not attempt to repair the unit. For authorized ser-
vice options, contact SERVPRO
®
RMA Department
at 866-885-6833 or email rma@servpronet.com.
BEFORE YOU BEGIN
Warranty registration
To process a warranty or repair claim, just click the
“RMA/ Warranty Form” listed under the “Products” tab
on the ServproNET
®
home page or it is also found at the
Equipment page on ServproNET.
You may contact the SERVPRO
®
RMA Department by
phone at 866-885-6833 or via email at
rma@servpronet.com.
To expedite the warranty claim process, please have the
following:
• Equipment model number.
• Serial number.
• Usage hours (if applicable).
When Franchises purchase equipment from Servpro
Industries, Inc., unit date of purchase and serial numbers
are recorded on the invoice. As part of the Servpro In-
07-01897D #613 (F413-SP) Warranty 07-00420 1 Dri-Eaz Products, Inc.
To Next Page
Need help?
General
