EasyManua.ls Logo

SetPower AB15 - TROUBLE SHOOTING; 6.1 POWER CUTTING IN;OUT; 6.2 COMMON 12 V POWER SUPPLY ISSUES

Default Icon
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6.TROUBLE SHOOTING
Your fridge has built in battery protection and needs a
minimum 10.9 V to start and 9.6 V to continue operating.
During operation a load is placed on the power supply
and voltage can drop by as much as 2 V, especially if
the wiring in insufficient (less than 6mm direct to battery)
or if there is a loose connection somewhere.
If this occurs when you try and start your SetPower and
the power supply drops under 10.9 V it will not start. If
this occurs when your SetPower is running and the
power supply drops below 9.6 V it will stop.
6.1 POWER CUTTING IN/OUT
11
Wiring
● Often the standard wiring from the car battery to the
12V outlet is too small.
A minimum 6mm automotive wiring should be used and
the earth should be wired directly back to the battery.
6.2 COMMON 12V POWER SUPPLY ISSUES
Battery
● The car battery could be old, undersized or have a
dead cell causing too much voltage drop.

Related product manuals