● Do not use a DC extension cord.
● Do not use a power strip or two-way splitter.
● Do not use power cord adapters of any kind other than
those provided by the manufacturer.
● Do not use ice cubes or fill the cooler with water. If ice
does accumulate at the bottom of the cooler, defrost the
unit and use the drain plug to drain the water.
● Do not modify the unit in any way.
● Do not place hot materials (75 °F or higher) in the cooler.
Allow materials to cool (50 °F or less) before placing
them inside the cooler.
● Do not tip or store the cooler at an angle greater than
30° for extended periods. Compressor oil contamination
of the cooling system could occur.
● Allow 2–4 inches of space around the cooler at all times
for proper ventilation of the cooling system.
● The cooler must be secured at all times using straps or
a mounting plate, especially in mobile applications.
16
To Next Page
Loading...
