This document is an instruction manual for the Smartele 12"/16" Rechargeable Floor Fan.

Function Description

The Smartele rechargeable floor fan is designed to provide cooling and air circulation. It is suitable for domestic use and can be used in various settings, including camping, picnics, and other outdoor activities, due to its rechargeable nature. The fan offers multiple speeds and can be adjusted for optimal air circulation. It also features a USB charging port for charging external devices like smartphones. The fan can be used as a floor fan or mounted on a wall.

Important Technical Specifications

The manual details two models: FF12Y (12" Rechargeable Floor Fan) and FF16Y (16" Rechargeable Floor Fan).

FF12Y - 12" Rechargeable Floor Fan:

Product Dimensions: 425 x 175 x 370mm
Net Weight: 3.2kg
Motor: BLDC
Power: Max 43W
Power Input: 100-240V~50/60Hz 1.5A
Power Output: 24V
USB Output: 5V 1A
Charge Time: 2.5h
Working Time (At Min Speed): 30h
Working Time (At Max Speed): 4h
Min Noise Level: 45dB
Max Noise Level: 63dB
IP Rating: IP24

FF16Y - 16" Rechargeable Floor Fan:

Product Dimensions: 535 x 200 x 470mm
Net Weight: 4.24kg
Motor: BLDC
Power: Max 43W
Power Input: 100-240V~50/60Hz 1.5A
Power Output: 24V
USB Output: 5V 1A
Charge Time: 2.5h
Working Time (At Min Speed): 30h
Working Time (At Max Speed): 3h
Min Noise Level: 45dB
Max Noise Level: 63dB
IP Rating: IP24

Both models feature a built-in rechargeable lithium-ion battery pack.

Usage Features

Parts: The fan consists of:

Front grille
AS fan blades
Adjusting nuts
Fan stand
Anti-slip rubber feet
Base
Handle
Rear grille
Fan speed knob
Control panel
USB charging port
Power connector
Battery
Hook

Control Panel: The control panel includes power indicator lights and a fan speed knob.

Power Indicator Lights: These lights indicate the remaining battery charge percentage. When fully charged, all lights illuminate. During charging, the lights flash consecutively from left to right, with each light stopping blinking and remaining on as the charge reaches 20% increments. At 20% charge, the indicator light will blink, and at 0%, the appliance will turn off.
Fan Speed Knob: This stepless knob allows for adjusting the fan speed to meet specific requirements.

Set-Up:

Remove the appliance and power adapter from the box.
Place the appliance on a flat and stable surface.
Plug the power adapter into a power socket and connect it to the fan's power connector to charge the appliance.
Once fully charged, unplug the power adapter.
Turn the appliance on.

Fan Angle Adjustment: The fan angle can be adjusted through 160° to achieve optimal air circulation.

Turn off the appliance.
Slightly loosen the adjustment nuts by turning counter-clockwise.
Adjust the fan angle to the desired position.
Tighten the adjustment nuts by turning clockwise.
Turn on the appliance.

USB Charging Port: Insert a USB cable into the USB charging port (5V 1A output) to charge devices such as a smartphone.

Wall Installation: The fan can be wall-mounted if secured to a flat, smooth, very stable wall that is resistant to tipping over.

Ensure the fan is at least 2m above the floor.
Fix two hooks to the wall (as shown in the manual's diagram), making holes and inserting screws.
Attach the appliance to the wall with the hooks.
Ensure the fan is securely installed.

Note: Do not position the appliance near sources of heat, flammable materials (curtains, carpets), or explosive materials (spraycans).

Maintenance Features

Cleaning:

Turn off the appliance.
Unplug the power adapter from both the power socket and the power connector.
Use a soft and dry cloth to clean away dust and debris from the exterior surface of the appliance.

Safety Warnings (Important for Maintenance):

Prior to cleaning or other maintenance, the appliance must be disconnected from the power adapter and power cord.
Cleaning and user maintenance shall not be made by children without supervision.
Do not insert fingers or anything into the front and rear grilles or the fan blades.
Do not operate the appliance with wet hands.
Do not leave the appliance unattended whilst connected to the power adapter and power cord.
Do not pull the power adapter and power cord to stop the appliance when connected.
Do not unplug the power adapter and power cord from the appliance until it has been switched off.
Do not modify the appliance or use any accessories other than those supplied.
Do not clean the appliance with chemical solvents.
If the power adapter or power cord is damaged, it must be replaced by the manufacturer, its service agent, or a similarly qualified person to avoid danger.
Do not attempt to repair or adjust any electrical or mechanical elements of the appliance, as this is unsafe and will void the warranty.

Storage:

Unplug the appliance if connected to the power adapter and power cord.
Store in a cool and dry place when not in use.
Never place anything on top of the appliance.

Battery Care:

Only recharge the appliance with the provided power adapter and power cord. Do not use the power adapter and power cord with any other appliance.
A rechargeable lithium-ion battery pack is built into the appliance. Do not dispose of the product in a fire as it may explode.

SetPower SMARTELE FF12Y - Page 7

Table of Contents