Remove the appliance and
power adapter from the
box.
Place the appliance on a
flat and stable surface.
Plug the power adapter
into a power socket and
connect to the power
connector to fully charge
the appliance
When it is charging, the
LED indicator lights will
flash consecutively from
left to right. As the power is
restored in 20%
increments the
corresponding light will
stop blinking and remain
permanently on.
Once fully charged all the
power indicator lights will
remain on.
Unplug the power adapter
from the power socket and
the power connector. The
indicator lights will switch
of f.
Turn the appliance on.
1.
2.
3.
4.
5.
6.
7.
Prior to use follow the below
steps and ensure that the
appliance is fully charged.
Adjust the fan angle through
160° to achieve optimal air
circulation.
Turn of f the appliance.
Slightly loosen the
adjustment nuts by turning
counter-clockwise.
Adjust fan angle to desired
angle.
Tighten the adjustment
nuts by turning clockwise.
Turn on the appliance.
1.
2.
3.
4.
5.
Insert a USB cable to charge
devices such as a
smartphone.
Note, the output from the
USB charging port is 5V 1A.
Set-Up
Fan Angle Adjustment
To adjust the fan angle:
USB Charging Port
Firstly we should turn of f the
appliance and unplug the
power adapter from the
power socket and the power
connector. Then we can use a
soft and dry cloth to clean
away dust and debris from
the exterior surface of the
appliance.
Cleaning
8
To Next Page
Loading...