Need help?Do you have a question about the Settop Repeater and is the answer not in the manual?
Illustrates the connection diagram for the SETTOP Repeater, radio, and battery.
Details status indicators for GPS, Battery, GSM, Radio, and Autoconnection on the main screen.
Configures radio protocols, channel, and transmission format (Trimtalk/transparent).
Configures NTRIP caster connection parameters like IP, port, user, and password for internet access.
Configures telephone settings, including APN, username, and password for GSM connectivity.
Guides on selecting a caster, establishing connection, and downloading base data.
Explains the transition from 'Connect' to 'Stop' button and monitoring download progress.
Addresses issues like no APN, SIM detection failures, and poor GPRS signal.
Covers errors related to invalid user/password (ERROR 5) and base not found (ERROR 6).
Details connecting the Repeater to a PC and running the Settop Repeater Service software.
Provides instructions for entering boot mode and updating the device firmware.
Explains how to create, load, edit, and save caster lists on a PC for the Repeater.
Describes the process of sending configured caster lists to the SETTOP Repeater.
Details updating the internal GSM module firmware via internet, requiring APN and user credentials.
To Next Page
General