EasyManua.ls Logo

Setty GB-600 - Specification

Setty GB-600
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
Specication:
Rated Power: 3 W
Battery Capacity: 300 mAh
Bluetooth version: 5.0
Waterproof: IPx4
Input voltage: 5 V
Working time: up to 3 hours
Working range: 10 m
Signal-to-noise ratio: 75 db
Frequency response: 100 Hz - 20 kHz
Built-in microphone: yes
Transmission frequency Maximum radiated power
2402-2480MHz 3,6dBm(EIRP)
Charging
The speaker has a built-in battery to prevent damage to the
set, please do not remove the battery yourself.
Connect the cable from the USB connector to a power so-
urce with a maximum voltage of 5 DC for example mobile
phone charger. Connect the cable with micro USB connector
to the speaker. Charging is indicated by red LED diode. The
diode goes owhen speakers fully charged.
EN

Related product manuals