SEVERIN CY7087 User Manual

104 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

DE Singlecyclone Bodenstaubsauger – Gebrauchsanleitung ..........2

GB

Single-cyclone vacuum cleaner – Instruction manual .............. 14

FR

Aspirateur traineau singlecyclonique – Mode d’emploi .............26

NL

Singlecyclone vloerstofzuiger – Bedieningshandleiding ........... 38

ES

Aspirador monociclón – Manual de instrucciones ....................50

IT

Aspirapolvere monociclonico – Istruzioni per l’uso ................... 62

SE

Singlecyclone-golvdammsugare – Bruksanvisning ..................74

PL

 OdkurzaczSinglecyclone–Instrukcjaobsługi ..........................86

CY7087

www.severin.com

Table of Contents

Questions and Answers:

A
Angel AllenAug 16, 2025
Why is my SEVERIN CY7087 not picking up dirt?
- W
  Wesley SanchezAug 16, 2025
  If your SEVERIN Vacuum Cleaner isn't picking up dirt or the suction power has dropped, here are a few things to check: * The attached nozzle may be unsuitable for the floor. Select and attach the correct nozzle. * If using the floor nozzle, the carpet/hard floor selector might be in the wrong position. Adjust the switch to the correct position. * The suction power setting may not be appropriate for the type of floor. Adjust the suction power accordingly. * The dust container may be full and needs emptying. It's also a good idea to clean the filters.
K
Kathryn HinesAug 19, 2025
What to do if my SEVERIN CY7087 suddenly stops?
- R
  Robin FordAug 19, 2025
  If your SEVERIN Vacuum Cleaner suddenly stops, the integrated overheating protection may have been activated, possibly due to an overfilled dust container or filter. Here's what to do: 1. Switch off the appliance. 2. Disconnect the plug from the socket. 3. Empty the dust container or clean the filter to eliminate the cause of overheating. Also check for any clogs, including in the hose, nozzle, and telescopic tube. 4. Close the appliance and reattach all accessories. 5. Wait about 45 minutes for the appliance to cool down before switching it on again.
T
traciguzmanAug 22, 2025
Why does my SEVERIN Vacuum Cleaner smell or release dust?
- K
  Kaitlin HopkinsAug 22, 2025
  If your SEVERIN Vacuum Cleaner develops an odor or releases dust during vacuuming, it's likely that parts removed for cleaning the filters or changing accessories were not correctly reinstalled or closed. Check all parts to ensure they are assembled correctly.
D
David BlakeAug 25, 2025
How to fix the blue light on my SEVERIN Vacuum Cleaner?
- J
  Jody CooleyAug 26, 2025
  If the light on the ON/OFF switch of your SEVERIN Vacuum Cleaner is blue, it means the filters are contaminated or the airway is clogged. You should empty the dust container and clean the filters.
S
Susan JohnsonAug 28, 2025
What to do if the SEVERIN Vacuum Cleaner dust container comes loose?
- A
  annaharrisAug 28, 2025
  If the dust container of your SEVERIN Vacuum Cleaner has come loose while being carried, it is likely that the release button was accidentally pushed. Make sure not to push this button while carrying the appliance.
M
Matthew SampsonAug 31, 2025
Why does my SEVERIN CY7087 Vacuum Cleaner suddenly stop vacuuming?
- C
  Christopher CharlesAug 31, 2025
  The integrated overheating protection may have been activated, possibly due to an overfilled dust container or filter. To resolve this: 1. Switch off the appliance. 2. Disconnect the plug from the socket. 3. Empty the dust container or clean the filter. Also check for and remove any clogs, including in the hose, nozzle, and telescopic tube. 4. Reassemble the appliance and reattach all accessories. 5. Wait about 45 minutes for the appliance to cool down before switching it on again.
T
Terry HoweSep 3, 2025
Why is my SEVERIN Vacuum Cleaner not picking up dirt or has low suction?
- S
  Sarah MillerSep 3, 2025
  There are several reasons why your SEVERIN Vacuum Cleaner might not be picking up dirt effectively or has low suction: * The attached nozzle may be unsuitable for the floor type. Select and attach the correct nozzle. * The “carpet/hard floor” selector is in the wrong position for the floor type when the floor nozzle is attached. Select the correct switch position. * The suction power setting may not be appropriate for the floor type. Set the correct suction power. * The dust container may be full and needs emptying. It is also recommended to clean the filters.
J
Joanna GomezSep 6, 2025
What to do if the light on my SEVERIN CY7087 Vacuum Cleaner ON/OFF switch is blue?
- S
  smithjacobSep 6, 2025
  If the light on the ON/OFF switch of your SEVERIN Vacuum Cleaner is blue, it indicates that the filters are contaminated or the airway is clogged. To solve this, empty the dust container and clean the filters.
M
Mr. Scott DiazSep 8, 2025
What to do if my SEVERIN CY7087 dust container comes loose while being carried?
- B
  Brooke CoxSep 9, 2025
  The dust container may come loose while carrying the SEVERIN Vacuum Cleaner if the release button was accidentally pushed. Ensure you do not push this button while carrying the appliance.

SEVERIN CY7087 Specifications

General

Brand	SEVERIN
Model	CY7087
Category	Vacuum Cleaner
Language	English

Related product manuals

Preview: SEVERIN CY 7089

SEVERIN CY 7089

Preview: SEVERIN CY 7106

SEVERIN CY 7106

Preview: SEVERIN CY 7088

SEVERIN CY 7088

Preview: SEVERIN 7045

Preview: SEVERIN 7035

Preview: SEVERIN 7105

Preview: SEVERIN HV 7144

SEVERIN HV 7144

Preview: SEVERIN HV 7165

SEVERIN HV 7165

Preview: SEVERIN HV 7184

SEVERIN HV 7184

Preview: SEVERIN HV 7164

SEVERIN HV 7164

Preview: SEVERIN AH-7913

SEVERIN AH-7913

Preview: SEVERIN BC 7049

SEVERIN BC 7049