EasyManua.ls Logo

SEVERIN TO2060 - Setting up the Oven

SEVERIN TO2060
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
28
GB
The control panel in detail
1
2
3
4
Fig. 2: Control panel in detail
Pos. Description/Function
1 Indicator lamp
(lit while the oven is switched on)
2 Temperature control
(100 – 230 °C)
3 4-position switch
OFF
Upper heat
Lower heat
Upper and lower heat
4 Timer
(01:00 – 60:00 mins)
4 Setting up the oven
WARNING!
Fire hazard! The heat radiating from the oven is
suf ciently strong to ignite in ammable objects
nearby.
The oven must not be installed or operated
inside a cupboard.
The oven must not be installed directly
underneath a cupboard or shelf.
A suf cient minimum clearance from any
appliance, overhang, ceiling or other object
must be maintained.
Ensure suf cient ventilation around the unit at all times. The appliance
should therefore be set up at a site which meets the following requirements:
near an earthed safety socket (minimum fuse protection 10 A),
positioned horizontally and protected from shock and vibration,
heat-proof,
well away from any heated or in ammable surfaces and objects
(> 1 m)
The following minimum clearances from any wall or other object must be
maintained:
• Sides: 12 cm
• Rear: 12 cm
• Top: 30 cm

Table of Contents

Related product manuals