33
GB
 During the pre-heating phase, the display shows an
animated picture.
 Once pre-heating is complete, the display shows the
remaining grilling time and counts down.
 The ‚Keeping warm‘ function may still be activated or de-activated
during the grilling cycle („ “).
 Once the grilling cycle is complete, the slide control automatically
comes up again.
 However, if you have selected the ‚Keeping-warm‘ function („ “)
before or during grilling, the sausages will remain inside
the appliance and be kept warm for up to 30 minutes.
 If required, the ‚Keeping-warm‘ function may also be activated
within 60 seconds after completion of the grilling cycle: Simply press
the „ “ button and push down the slide control.
7. Check the browning level:
If you are not satisfied with the result:
• Press the „ “ button briey, or keep it pressed, in order to increase
the grilling time in 30-second intervals to 01:00 minute (see also 7
‚Adjusting the grilling time‘ on page 34), and lower the slide control
afterwards.
If you are happy with the result:
• Carefully remove the sausage using the wooden tongs.
WARNING!
Caution: Danger of burns. The sausages are
extremely hot immediately after grilling!
– Carefully remove the sausage using a non-me-
tallic implement, eg the wooden tongs.
– Point out to your guests that the sausage may
be very hot.
8. If no more grilling is planned for the same day:
• Remove the plug from the socket.
• Wait for around 30 minutes, until the appliance and the content of
the fat tray have cooled down to the ambient temperature.
• Clean all components as described below, see:
- 9.1 ‚After use: cleaning the fat tray‘ on page 35
- 9.2 ‚After use: cleaning the grill insert‘ on page 36
- 9.3 ‚After use: cleaning the interior‘ on page 38
- 9.4 ‚If required: cleaning the housing‘ on page 39
To Next Page
Loading...
