To Next Page
J
Jamie CohenJul 27, 2025
What to do if Seville Classics Indoor Furnishing shows E-12 error?
- AAshley MccormickJul 27, 2025
Let the system cool down then re-initialize the system.
What to do if Seville Classics Indoor Furnishing shows E-12 error?
Let the system cool down then re-initialize the system.
Why does my Seville Classics Indoor Furnishing desk display 'HOT'?
The 'HOT' message appears because the desk motors are overheated. To resolve this, stop using the desk for 10 minutes to allow the motors to cool down.
What to do if my Seville Classics Indoor Furnishing desk wobbles?
If your desk wobbles excessively, retighten all screws and bolts. Also, adjust the leveling feet to ensure the desk stands level.
What to do if Seville Classics Indoor Furnishing desk won't move but the controller lights up?
If the controller illuminates but the desk does not move, re-initialize the desk by unplugging the power cord, waiting 10 seconds, and then plugging it back in.
Why is my Seville Classics Indoor Furnishing desk noisy?
It's normal for the desk to make noise as the stages move. However, if the noise is unusually loud, apply a silicon-based lubricant.
How to fix a Seville Classics Indoor Furnishing desk when it won't move and the controller is dark?
Check all connections to ensure the power cord is properly plugged into both the control box and a working power outlet. Press any button on the controller to confirm that it illuminates.
General| Product Name | Seville Classics airLIFT S2 |
|---|---|
| Category | Indoor Furnishing |
| Weight Capacity | 300 lbs |
| Inflation Method | Manual inflation |
| Portability | Portable |
| Usage | Home, office |
Initialize desk by holding UP/DOWN ARROW until zeros blink; desk cycles through heights.
Use UP ARROW to lift and DOWN ARROW to lower the desk.
Save heights by pressing M + Number button until the number blinks.
Recall saved heights by pressing the Number button twice or holding it.
Addresses desk movement, wobbling, overheating, and noise issues with resolution steps.
Details error codes (E-1 to E-12) and recommended actions like re-initialization or contacting support.
Covers 7-year non-electronic and 2-year electronic component warranties from purchase date.
Steps for obtaining service: registration, contact, part return, and proof of purchase.
Key specs: height range, weight capacity, base dimensions, and base weight.
Specifies the desk's lifting speed when unloaded.
Provides telephone, fax, hours, email, and website for customer assistance.
