EasyManua.ls Logo

Seville Classics AirLift User Manual

Seville Classics AirLift
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Instrucons to Reset
WARNING! It may be necessary to reset the desk aer unplugging,
power outages, assembly, or when troubleshoong.
1. Press and hold the UP ARROW and DOWN ARROW simultaneously on the controller unl 3 blinking
zeros appear on the display.
2. The desk will descend to its lowest height, then rise to its highest, and then descend to middle-
height. Desk is ready when 38 (±1) appears on the display.
Blinking 000 followed by 38(±1) UP + DOWN simultaneously
Contact us for live help with assembly and troubleshoong!
We're happy to help make your Seville Classics experience as sasfying as possible.
If you have any quesons or any issues at all, don't hesitate to give us a ring or send us an email.
Telephone: (800) 323-5565
Fax: (310) 533-3899
Hours: 8:30 AM – 4:30 PM (PST), Monday to Friday
Email: Support@SevilleClassics.com
Homepage: www.SevilleClassics.com
Address: 19401 South Harborgate Way, Torrance, CA 90501 – 1322, USA
Thank you for shopping with Seville Classics!
Question and Answer IconNeed help?

Do you have a question about the Seville Classics AirLift and is the answer not in the manual?

Seville Classics AirLift Specifications

General IconGeneral
BrandSeville Classics
ModelAirLift
CategoryIndoor Furnishing
LanguageEnglish

Summary

Instructions to Reset

Initiate and Perform Reset

Press and hold UP and DOWN arrow buttons on controller until 3 blinking zeros appear.

Confirm Reset Completion

Desk descends to lowest, rises to highest, then descends to middle-height.

Contact Us for Live Help

Troubleshooting Common Issues

Desk Not Moving or Controller Unresponsive

Check connections, power, controller illumination, and reset the desk.

Desk or Columns Moving Unevenly

Unplug, replug, reset desk, or switch motor cables if problem persists.

Desk Wobbling or Panel Displaying HOT

Tighten screws, adjust feet, or allow desk motors to cool down.

Noisy Desk Legs or Oil on Legs

Apply lubricant for unusual noise or wipe legs with paper towel/cloth.

Related product manuals