Seville Classics UltraShield WEB657

To Next Page

Customer Service Informaon

Telephone: (800) 323-5565

Fax: (310) 533-3899

Hours: 8:30 AM – 4:30 PM (PST)

Email: Support@SevilleClassics.com

Homepage: www.SevilleClassics.com

102020

Step 6.

Remove plasc from feet and stand

UltraShield® upright.

Remove the bags to nish.

Care Instrucons

Clean with mild soap and water. Dry with clean microber towel.

Use Instrucons

Simply set the shields in place to use.

To change the orientaon of the shield:

 Remove the LONG SCREWS (E) in Step 5.

 Unclamp the feet from the panels

 Reaach to the other side and re-insert LONG SCREWS (E).

Shields can be used vercally or horizontally without issue.

Model: WEB657, 8

Thank you for choosing Seville Classics! We hope that you enjoy your new

protecve shield. Please read through this user guide for parts list, assembly

instrucons, frequently asked quesons and contact informaon.

102020

UltraShield® Acrylic Tabletop Shield

Need help?

Do you have a question about the Seville Classics UltraShield WEB657 and is the answer not in the manual?

Summary

Care Instructions

Use Instructions

Changing Shield Orientation

Instructions on how to change the orientation of the shield by removing and re-inserting screws and unclamping feet.

Customer Service Information

Parts List

Assembly Instructions

Step 1: Align Feet and Attach Clamps

Align feet side-by-side, pull apart clamps, and fit bottom clamps over holes towards the logo.

Step 2: Fit Gaskets and Attach Small Screws

Fit gaskets into clamps and attach them using small screws.

Step 3: Prepare and Insert Panel

Lay acrylic panel flat, open bag side, and fit the bottom of the panel into the clamp's metal lip.

Step 4: Slide Upper Clamp

Slide the upper clamp onto the lower clamp, ensuring the panel sits above the metal lip, then press until snug.

Step 5: Secure Clamps with Long Screws

Attach the clamps using long screws and repeat the process for the other side.