Seville Classics WEB619 - Assembly Instructions; Frame and Feet Assembly; Middle Shelf Installation; Hanger and X-Brace Attachment

2
STEP 1.
Press FEET (H) into booms of
BASE FRAMES (B).
Connect FRAMES (A, B) with
45 mm BOLTS (L) into
NUTS (M) using HEX KEY (R).
Hold NUTS (M) with
WRENCH (S) to ghten.
Repeat for all FRAMES (A, B).
STEP 2.
Install MIDDLE SHELVES (E)
with HEX SCREWS (I) using
HEX KEY (R) to frame.
STEP 3.
Connect the remaining frame
with HANGER (F) using 30 mm
BOLTS (J) and HEX KEY (R).
Connect X-BRACE (G) to frames
with 28 mm BOLTS (K) into
NUTS (M) using HEX KEY (R).
Hold NUTS (M) with
WRENCH (S) to ghten.
Assembly Instrucons