To Next PageTo Next Page
Need help?Do you have a question about the Sevylor Willamette and is the answer not in the manual?
General| Airtight System | Yes |
|---|---|
| Oar Locks | Yes |
| Material | PVC |
| Chamber Construction | Multiple |
| Air Valves | Boston |
| Inflation | Inflatable |
Covers crucial safety measures including PFD use, supervision, overloading, towing, water conditions, and responsible operation.
Explains that 'CAUTION' denotes an imminent hazard requiring compliance with instructions.
Explains that 'WARNING' denotes safety measures and unsafe practices leading to injury or damage.
Highlights owner responsibility, PFD use, capacity plate observance, towing limitations, and avoiding chemical damage.
Advises against over-inflation and using compressors, emphasizing adherence to product-specific pressure.
Step-by-step guide for inflating using the Sevylor® QuickPump™ unit, including valve sealing.
Step-by-step guide for inflating using the Sevylor® Dual Action Hand Pump or similar devices.
Details the specific order for inflating boat chambers for optimal volume and buoyancy.
Explains how temperature affects air pressure and how to manage it.
Guides on deflating the boat using Sevylor® QuickPump™ and Hand Pump units.
Details NMMA certification and ABYC standards for listed boat models and their capacities.
Specifies persons capacity, payload, and engine limitations for each boat model to ensure safety.
Warns against mounting motors on boats without HP ratings and notes specific model exclusions.
Explains the Sevytest™ gauge as a pressure indicator, not an inflation gauge, based on PVC lengthening.
Guides on how to read the Sevytest™ gauge and adjust air pressure based on the indicator's position.
Covers following regulations, familiarization with conditions, observing limits, and proper entry/exit.
Details restrictions on motor mounting, specifying compatible motors and required hardware.
Instructions for properly installing the inflatable boat's grab line by feeding it through eyelets and tying ends.
Steps for assembling oars, joining shafts, attaching blades, and inserting them into oar locks.
Provides instructions for using the included repair patch to fix small punctures on the inflatable.
Details the application of Sevylor® AirSeal for repairing small to extensive damage on vinyl inflatables.
Outlines the 90-day warranty period, coverage for material/workmanship defects, and exclusions.
Lists conditions not covered by warranty, including normal wear, misuse, commercial use, and unauthorized repairs.
Provides instructions on how to get warranty service, including contact information and packaging requirements.
