Need help?Do you have a question about the SEW-Eurodrive K..187 Series and is the answer not in the manual?
General| Series | K..187 |
|---|---|
| Shaft Configuration | Solid shaft, Hollow shaft |
| Power Range | Up to 200 kW |
| Protection Class | IP65 |
| Efficiency Class | IE1, IE2, IE3, IE4 |
| Gearbox Type | Helical-Bevel Gearbox |
Offers safety notices regarding installation, including warnings about overdetermination and cold air currents.
Details checks before startup, direction of rotation, and actions in case of operational changes.
Directs users to the relevant chapter for inspection and maintenance procedures.
Explains how to interpret gear unit nameplates and type designations with examples.
Outlines essential checks and requirements before beginning the installation process.
Provides detailed instructions and safety precautions for mounting the gear unit correctly.
Describes the assembly of input and output elements onto a gear unit with a solid shaft.
Explains how to mount torque arms for various gear unit types, including tightening torques.
Details the process for mounting and removing gear units with keyway or splined hollow shafts.
Provides instructions for mounting and removing gear units using shrink disk technology.
Describes the mounting procedure for shaft-mounted gear units utilizing the TorqLOC® system.
Details the procedures for mounting rotating and fixed covers onto the gear unit housing.
Explains how to mount IEC and NEMA adapters, including specified distances and torques.
Describes the mounting process for AQA and AQH adapter couplings, including standards and torques.
Guides on how to check the oil level before startup, including using oil sight glasses.
Details procedures for checking oil levels and changing oil based on gear unit type and mounting position.
Provides a troubleshooting guide for common gear unit faults, their possible causes, and measures.
To Next Page