Need help?Do you have a question about the SEW-Eurodrive KA87 and is the answer not in the manual?
General| Brand | SEW-Eurodrive |
|---|---|
| Model | KA87 |
| Category | Engine |
| Language | English |
Checklist for activities before startup in potentially explosive atmospheres.
Details essential conditions and requirements to be met before assembly.
Provides instructions on how to install the gear unit, including support structure requirements and mounting.
Details the process of assembling input and output components using a mounting device.
States allowed ambient temperature range for gearmotors in category II2D.
Guides on checking the oil level before startup according to mounting position.
Explains how to measure surface temperature at max load during startup and temperature limits.
Lists important notes and hazards to observe before performing inspection or maintenance.
Details inspection and maintenance tasks based on time intervals.
Shows lubricant change intervals based on operating hours and oil bath temperature.
Guides on checking and adjusting slip torque using a torque wrench or hook spanner.
Explains how to check oil level and change oil based on gear unit type, size, and mounting position.
Details checking oil level via the oil level plug for specific gear unit types.
Guides on checking oil level via the cover plate opening.
Details how to change oil using the cover plate opening.
Explains how to check oil level via the control bore for S37 helical-worm gear units.
Guides on checking oil level via the screw plug.
Details how to change oil using the screw plug.
Details checking oil level via the oil level plug for SPIROPLAN® W37 in specific positions.
Illustrates the six standard mounting positions (M1-M6) for gear units.
Lists permitted lubricants for SEW-EURODRIVE explosion-proof gear units with abbreviations and notes.
To Next Page