Need help?Do you have a question about the SEW-Eurodrive KA127 and is the answer not in the manual?
General| Brand | SEW-Eurodrive |
|---|---|
| Model | KA127 |
| Category | Engine |
| Language | English |
Checklists for activities before and during startup in potentially explosive atmospheres.
Explains the information present on the gear unit nameplate and its designation.
Lists essential conditions and checks to be met before mechanical assembly.
Details the procedure for installing the gear unit and its mounting requirements.
Provides specific tightening torques for retaining screws for various gearmotors.
Details the assembly of input and output components using a mounting device.
Specifies ambient temperature, temp class, and surface temp for II2GD category units.
Details installation notes for shaft-mounted units with keyway or splined hollow shafts.
Provides installation notes for shaft-mounted gear units using shrink disk technology.
Instructs to check oil level according to mounting position before startup.
Details measuring surface and oil temperatures during startup for operational checks.
Details inspection and maintenance tasks based on time intervals and operating conditions.
Shows lubricant change intervals based on operating hours and oil temperature.
Details inspecting/changing friction lining and adjusting slip torque for AR adapters.
Outlines oil level check and change procedures for various gear unit types.
Illustrates the six standard mounting positions (M1-M6) for gear units.
Lists permitted lubricants, their properties, and fill quantities for explosion-proof gear units.
Lists common gear unit malfunctions, their possible causes, and remedies.
To Next Page