Need help?Do you have a question about the SEW-Eurodrive S 37 Series and is the answer not in the manual?
General| Brand | SEW-Eurodrive |
|---|---|
| Model | S 37 Series |
| Category | DC Drives |
| Language | English |
Explains signal words and structure for hazard communication.
General safety notes for preventing injury and damage to property.
Outlines user responsibilities for safe operation and adherence to regulations.
Defines specialists qualified for mechanical and electrotechnical work.
Specifies intended use and compliance with ATEX directives.
Critical safety note regarding explosive atmospheres and machinery.
Requirements for proper installation and assembly of the drive unit.
Procedures for safe startup and initial operation of the gear unit.
Explains the information presented on the gear unit and motor nameplate.
Specifies requirements for gear units in explosion-proof categories.
Comprehensive guide on safely installing the gear unit, including warnings.
Pre-startup checklist for potentially explosive atmospheres.
Procedure for checking and ensuring correct oil level before startup.
Guidelines for measuring surface and oil temperatures during startup.
Obligatory intervals and measures for routine inspection and maintenance.
Guidance on lubricant change intervals based on operating conditions and temperature.
Detailed procedures for checking oil level, changing oil, and cleaning the gear unit.
Illustrates the standard SEW-EURODRIVE mounting positions (M1-M6).
Key and illustrations for understanding mounting position sheets.
Information on factory-fill greases and lubricant recommendations.
Guidance on prescribed lubricant fill quantities and adaptation for mounting positions.
Troubleshooting guide for common gear unit faults and their causes/measures.
To Next Page
