EasyManua.ls Logo

SEW MOVIMOTMM..D - User Manual

Default Icon
220 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Drive Technology \ Drive Automation \ System Integration \ Services
Operating Instructions
MOVIMOT
®
MM..D
With DRS/DRE/DRP AC Motor
Edition 12/2010 17000017 / EN

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the SEW MOVIMOTMM..D and is the answer not in the manual?

Summary

Unit Design

MOVIMOT Inverter

Shows the connection box and MOVIMOT® inverter layout.

Type Designation of MOVIMOT Drive

Explanation of the nameplate and type designation for the drive.

Type Designation of MOVIMOT Inverter

Details the nameplate and type designation for the inverter.

Type Designation of Variant Mounted Close to Motor

Shows nameplate and type designation for close-mount variant.

Mechanical Installation

MOVIMOT Gearmotor Installation

General info and installation requirements for gearmotors.

Installation of MOVIMOT Inverter Close to Motor

Shows mounting dimensions for close-to-motor installation.

Electrical Installation

Installation Instructions

Supply system connection and permitted cable cross sections.

Connection of the MOVIMOT Drive

Wiring diagram for CW/stop, CCW/stop, and setpoint terminals.

Connection Between MOVIMOT and Motor When Mounted Close to Motor

Connection using pre-fabricated hybrid cables.

Connection of the MOVIMOT Options

Details connections for MLU, MNF, URM, BEM, BES, MBG, MWA, MWF options.

Easy Startup

DIP Switches S1 and S2

Configuration settings for DIP switches S1 and S2.

Description of the DIP Switches S1

Details functions of DIP switches S1/1 through S1/8.

Description of the DIP Switches S2

Explains functions of DIP switches S2/1 through S2/8.

Selectable Additional Functions MM..D-503-00

Overview of additional functions configurable via DIP switches.

Additional Function 9: MOVIMOT for Hoist Applications

Enables MOVIMOT® for use in hoist applications.

Startup with Binary Control

Step-by-step guide for startup using binary control.

Easy Startup with RS-485 Interface;Fieldbus

Startup Procedure

Step-by-step guide for RS-485/fieldbus startup.

Function with RS-485 Master

Explains master-slave communication via RS-485.

Expert Startup with Parameter Function

Important Notes on Startup

Safety and preparatory notes for expert startup.

MOVITOOLS MotionStudio

Overview of SEW engineering tool for startup and diagnostics.

Integrating MOVIMOT in MOVITOOLS MotionStudio

Steps to integrate the MOVIMOT® inverter into the software.

Startup and Function Expansion with Individual Parameters

Expanding functionality by adjusting individual parameters.

Startup and Configuration with a Central Controller and MQP..

Configuring the drive via a central controller and fieldbus.

Startup by Transferring the Set of Parameters

Transferring parameter sets between identical drives.

Parameter List

Comprehensive list of all available parameters.

Parameter Description

Detailed explanation of specific parameters.

Operation

MOVIMOT Manual Operation with MOVITOOLS MotionStudio

Using the software for manual operation.

Service

Status and Error Display

Explains LED status codes and error meanings.

Error List

Troubleshooting guide for common errors, causes, and solutions.

Unit Replacement

Procedure for replacing the MOVIMOT® inverter.

Technical Data

Motor with Operating Point 400 V; 50 Hz or 400 V; 100 Hz

Technical data for motors at 400V/50Hz and 400V/100Hz.

Motor with Operating Point 460 V; 60 Hz

Technical data for motors at 460V/60Hz.

Motor with Operating Point 230 V; 60 Hz

Technical data for motors at 230V/60Hz.

Technical Data of Options & Accessories

Specifications for various options and accessories.

SEW MOVIMOTMM..D Specifications

General IconGeneral
CategoryEngine
ModelMM..D
TypeMOVIMOT
Frequency50 Hz / 60 Hz
Protection classIP55

Related product manuals