SFA Saniflo Sanicubic 2 User Manual

Troubleshoot motor failure to activate without sound, checking electrical supply and thermal shutdown.

Address motor humming but not activating, focusing on cutter assembly, pump cover, and capacitor issues.

Resolve continuous motor operation by checking discharge pipe, hydraulic issues, NRV, and control board.

Troubleshoot intermittent motor activation, examining connected fixtures and the non-return valve.

Resolve slow or poor wastewater evacuation by checking vent, impeller, drainage lines, and installation.

Address backflow issues by checking fixture proximity to pump activation level.

Resolve bad odors by ensuring the pump is vented to atmosphere or filtered.

Understand and troubleshoot alarm indicators like flashing red, steady red, and flashing yellow LEDs.