Basic operations
PAIRING WITH YOUR DEVICE
1. Open the Bluetooth settings on your device.
2. Power on your headphones (press and hold the MFB button for 1 second).
3. Select "SG Session" from the list of available devices in your Bluetooth settings.
MULTIPOINT CONNECTION
The SG Session headphones support simultaneous connection to up to two devices. If you have trouble
connecting to a second device, first disconnect the headphones from the initial device, then connect them to
the second device. Once connected, you should be able to pair the headphones with both devices
simultaneously.
To switch between devices, pause the music or video on the currently active device before resuming playback
on the other device.
DISCONNECTING FROM YOUR DEVICE
To disconnect the SG Session headphones from your device, you can either power off your headphones,
turn off Bluetooth on your device, or locate "SG Session" in your list of connected devices and disconnect
them.
RECONNECTING TO YOUR DEVICE
If your Bluetooth device supports automatic reconnection, the SG Session will automatically reconnect next
time you power them on. If your device does not support automatic reconnection, you will need to manually
reconnect the SG Session in your device's Bluetooth settings.
To Next Page
Loading...