PAGE 26
WWW.SGS-ENGINEERING.COM
CALL FOR ASSISTANCE: 01332 576 850
It is very dangerous to run a chainsaw with broken or missing
parts. Before starting the engine, make sure that all the parts
including bar and chain are installed properly.
1. Fill fuel and chain oil tanks respectively, and tighten the
caps securely. (1) Chain oil. (2) Fuel
8. STARTING THE ENGINE
WARNING
2. Press the priming bulb 8 to 10 times. This will help assist
with starting the saw and reduces the number of times
you’ll need to pull the pull start.
To Next Page
Loading...