SGS GPB260 - User Manual

13 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

FOR YOUR SAFETY

PLEASE READ THESE INSTRUCTIONS CAREFULLY

AND RETAIN THEM FOR FUTURE USE.

OWNER’S MANUAL

GPB260

LEAF BLOWER & VACUUM

No

Table of Contents

Questions and Answers

G
Gary JohnsonOct 30, 2025
How to prepare my SGS GPB260 for storage?
- W
  wilkinsonkellyOct 30, 2025
  To prepare your SGS Blower for storage, especially at the end of the season or if it won't be used for 30 days or more, allow the engine to cool and secure the unit. Store the unit and fuel in a well-ventilated area away from sparks or open flames from appliances like water heaters or furnaces. Ensure all guards are in place, and position the unit to prevent accidental injury from sharp objects. Keep the unit and fuel out of children's reach. Remove the spark plug, add 1 teaspoon of 2-stroke engine oil through the opening, and gently pull the starter rope 8-10 times to distribute the oil. Replace the spark plug with a new one, clean the air filter, and check for any loose or damaged parts, replacing them as needed. Use fresh fuel with the correct petrol-to-oil ratio each season. Clean the ...

Summary

General Safety Precautions

Secure Cover and Impeller

Ensure bottom cover secured/vacuum tube installed. Avoid impeller.

Beware of Flying Objects

Blower may throw objects at high velocity that can ricochet.

Hot Muffler Warning

Muffler is very hot; avoid touching. Keep combustibles away.

Bystander and Animal Safety

Keep bystanders/animals away. Do not point nozzle at people/pets.

Personal Safety and Operation

Protective Gear and Attire

Wear eye/ear protection, gloves, mask. Secure hair and loose clothing.

Safe Operating Conditions

Fuel Handling and Storage

Assembly Instructions

Blower Tube Assembly

Vacuum Attachment Assembly

Unit Conversion and Setup

Vacuum Tube Assembly

Safety Before First Use

Inspect area for debris and be aware of electromagnetic field impact.

Operation and Fueling

Operating Procedures

Fueling the Engine

Instructions for safely mixing and adding fuel, octane grade, and warnings.

Starting and Stopping the Engine

Starting a Cold Engine

Step-by-step instructions for starting a cold or out-of-fuel engine.

Starting a Warm Engine

Stopping the Engine

Maintenance Procedures

Storage and Troubleshooting

Storage Guidelines

Troubleshooting Table

Common issues, causes, and remedies for engine starting and operation problems.

Summary

General Safety Precautions

Secure Cover and Impeller

Ensure bottom cover secured/vacuum tube installed. Avoid impeller.

Beware of Flying Objects

Blower may throw objects at high velocity that can ricochet.

Hot Muffler Warning

Muffler is very hot; avoid touching. Keep combustibles away.

Bystander and Animal Safety

Keep bystanders/animals away. Do not point nozzle at people/pets.

Personal Safety and Operation

Protective Gear and Attire

Wear eye/ear protection, gloves, mask. Secure hair and loose clothing.

Safe Operating Conditions

Fuel Handling and Storage

Assembly Instructions

Blower Tube Assembly

Vacuum Attachment Assembly

Unit Conversion and Setup

Vacuum Tube Assembly

Safety Before First Use

Inspect area for debris and be aware of electromagnetic field impact.

Operation and Fueling

Operating Procedures

Fueling the Engine

Instructions for safely mixing and adding fuel, octane grade, and warnings.

Starting and Stopping the Engine

Starting a Cold Engine

Step-by-step instructions for starting a cold or out-of-fuel engine.

Starting a Warm Engine

Stopping the Engine

Maintenance Procedures

Storage and Troubleshooting

Storage Guidelines

Troubleshooting Table

Common issues, causes, and remedies for engine starting and operation problems.

SGS GPB260 Specifications

General

Brand	SGS
Model	GPB260
Category	Blower
Language	English