SGS PGH2200 - User Manual

15 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

PGH2200, PGH3000, PGH6500

FOR YOUR SAFETY

PLEASE READ THESE INSTRUCTIONS CAREFULLY

AND RETAIN THEM FOR FUTURE USE.

OWNER’S MANUAL

PETROL GENERATOR

Table of Contents

Questions and Answers

R
Ronnie RobinsonAug 10, 2025
What to do if my SGS PGH2200 Portable Generator will not start?
- C
  Connor SimpsonAug 10, 2025
  If your SGS Portable Generator won't start, there are several things you can check: * Ensure the fuel valve is in the 'down' position. * Verify the oil level is correct. * Confirm you are using 10W30 oil. * Make sure the choke is in the correct position. * Check for a spark by removing the HT lead from the spark plug, removing the spark plug, reconnecting the lead, and touching the metal on the spark plug against the generator frame. Gently pull the starter cord and listen for a 'ticking' sound or flashes from the spark plug tip. If there's no ticking or flashes, the spark plug may need replacing.
A
Amy TaylorAug 25, 2025
Why is my SGS PGH2200 difficult to start?
- D
  Douglas GarciaAug 26, 2025
  Your SGS Portable Generator might be hard to start due to a few reasons. A dirty air filter or fuel filter can cause this issue, so cleaning them might help. Also, if the pull start feels too hard, there might be too much oil; check the oil level with the dipstick and drain any excess from the oil sump bolt. If the pull start feels too slack, please contact SGS Engineering.

SGS PGH2200 Specifications

General

Engine Displacement	79cc
Weight	46.3 lbs
Rated Watts	2200 W
Starting Watts	2500 W
Engine Type	4-stroke OHV
Fuel Tank Capacity	1.1 gal
Noise Level	68 dB
Outlet Types	1 x 12V DC

Related product manuals

Preview: SGS SPG2200

Preview: SGS SDG8000SELR

SGS SDG8000SELR