What to do if my SGS SPG6500 has no electrical output?
If your SGS Portable Generator has no electrical output, first check that the breaker switch is up. Then, ensure the device you are trying to power is not faulty. Also, verify that the voltage output switch is set to the correct voltage (115 or 230V). Finally, inspect the connecting lead from the appliance or tool into the generator to ensure it is in good condition.
Why won't my SGS SPG6500 Portable Generator start?
If your SGS Portable Generator won't start, make sure the fuel valve tap is in the ‘down’ position and that the oil level is correct. Also, verify that you are using 10W30 oil and that the choke is in the correct position. Finally, check for a spark by removing the HT lead from the spark plug, removing the spark plug, reconnecting the lead, and touching the metal on the spark plug against the generator frame while gently pulling the starter cord. Listen for an audible ‘ticking’ sound and/or small flashes. If there is no audible ‘ticking’ and/or small flashes, the spark plug may need replacing.
How to fix difficult start of my SGS SPG6500 Portable Generator?
If your SGS Portable Generator is difficult to start, start by cleaning the air and fuel filters. If the pull start mechanism is too ‘hard’ to pull, check the oil level using the dipstick and drain any excess oil from the oil sump bolt at the bottom of the generator. If the pull start mechanism feels too ‘slack’, please contact SGS Engineering.
How to stop engine revving sounds on my SGS SPG6500?
If your SGS Portable Generator engine is making revving sounds (or ‘hunting’), it may need a carburettor adjustment. Turn the brass screw on the carburettor clockwise slowly and listen to the engine sound. If it does not improve, try turning the screw anticlockwise.
Essential safety rules for using the generator, including location and operation.
Guidance on correctly filling the generator's oil reservoir with the specified oil grade.
Instructions on safely adding unleaded petrol to the generator's fuel tank.
Detailed instructions for starting the generator using pull start and electric start.
Flowchart to diagnose and resolve common generator starting problems.
Essential safety rules for using the generator, including location and operation.
Guidance on correctly filling the generator's oil reservoir with the specified oil grade.
Instructions on safely adding unleaded petrol to the generator's fuel tank.
Detailed instructions for starting the generator using pull start and electric start.
Flowchart to diagnose and resolve common generator starting problems.
General| Fuel Type | Gasoline |
|---|---|
| Fuel Tank Capacity | 6.6 Gallons |
| Run Time at 50% Load | 10 Hours |
| Engine Type | 4-Stroke OHV |
| Starting System | Electric Start |
| Outlet Types | 120V 20A, 120/240V 30A |
To Next Page
